Equipaggiato con un DSP a 32/64 bit in virgola mobile e frequenza di campionamento a 96kHz. Disponibili preset specifici per diffusori DAD in apposita sezione download.
Queste caratteristiche rendono il DSP2000 ideale per un’ampia varietà di diffusori professionali e sezioni Sub/MF/HF in sistemi multi-amplificati.
| dati tecnici | DSP2000 |
| 8 Ohm stereo power (EIA/THD1%) | 650Wx2 |
| 4 Ohm stereo power (Pulse) THD1%) | 1050Wx2 |
| 8 Ohm bridge power (Pulse THD1%) | 2100W |
| Frequency response | 20Hz-20Khz@ 8 Ohm -0.5 dB |
| THD+N | <0.1% |
| Damping factor | >60 |
| S/N rate | >96dB |
| Input sensitivity/gain | 1Vrms/32dB/38dB |
| Input impedance (balance/unbalance) | Balance 20K / Unbalance 10K |
| Output circuit class | D class |
| Protection | Soft-start, short circuit, overload, DC, overheat, clip/limit, progressive volume |
| Cooling air-flow | Airflow from front panel to rear panel. |
| DSP specification | |
| Crossover filtering | Bessel. Butt. Link.-Riley (12,18,24.48dB/Oct.) |
| 8- band Eq type | Full paramtric, high shelf-low shelf (6-12dB/Oct.) |
| EQ gain | Adjustable from -20dB to +20dB |
| Crossover/Eq freq. band | 20Hz to 20kHz, 1/36Oct.step pitch (19980 position) |
| Full parametric eq filter Q | Adjustable from 0.404 to 28.852 |
| Maximum delay | 1S |
| Limiter threshhold | Adjustable from +20dBu to -20dBu,0,1dBu steps |
| Limiter release time | Adjustable to 2/4/6/8/16/32 x the attack time |
| Attack time | Adjustable from 0.3 to 100 ms |
| Power voltage / frequency | ~230V 10%/50Hz |
| Dimensions (WxHxD) | 483x89x382mm |
| Net weight | 6.8Kg |
| Gross weight | 8Kg |
